24
6. Update the console firmware.
For the best results, regularly check for
firmware updates. Touch Maintenance and then
touch Update to check for firmware updates using
your wireless network. The update will begin
automatically. IMPORTANT: To avoid damaging
the rower, do not turn off the console while the
firmware is being updated.
The screen will show the progress of the update.
When the update is complete, the console will turn
off and then turn back on. If it does not, press the
power switch and unplug the power adapter, wait
for several seconds, and then plug in the power
adapter again and press the power switch. Note: It
may take a few minutes for the console to be ready
for use.
Note: Occasionally, a firmware update may cause
the console to function slightly differently. These
updates are always designed to improve your exer-
cise experience.
7. Exit the settings main menu.
To exit the settings main menu, touch the back
button (arrow symbol).
HOW TO CONNECT TO A WIRELESS NETWORK
To use iFIT workouts and to use several other features
of the console, the console must be connected to a
wireless network.
1. Select the home screen.
First, turn on the console (see HOW TO TURN ON
THE CONSOLE on page 16). Note: It may take
up to a few minutes for the console to be ready
for use.
Next, select the home screen (Home button). When
you turn on the console, the home screen will
appear after the console boots up. If a workout is
selected, touch the screen and follow the prompts
to end the workout and return to the home screen.
If a settings menu is selected, touch the back but-
ton (arrow symbol) to return to the home screen.
2. Select the wireless network menu.
Touch the menu button (three horizontal lines
symbol) and then touch Wi-Fi to select the wireless
network menu.
3. Enable Wi-Fi
®
.
Make sure that Wi-Fi is enabled. If it is not enabled,
touch the Wi-Fi toggle to enable it.
4. Set up and manage a wireless network
connection.
When Wi-Fi is enabled, the screen will show a
list of available networks. Note: It may take a few
moments for the list of wireless networks to appear.
Note: You must have your own wireless network
and an 802.11b/g/n router with SSID broadcast
enabled (hidden networks are not supported).
When a list of networks appears, touch the desired
network. Note: You will need to know your network
name (SSID). If your network has a password, you
will also need to know the password.
Содержание NordicTrack RW600
Страница 4: ...UTS 4...
