manualshive.com logo in svg
background image

3

    WARNING:

 To reduce the risk of burns, fire, electric shock, or injury to persons, read 

all important precautions and instructions in this manual and all warnings on your elliptical before 

using your elliptical. ICON assumes no responsibility for personal injury or property damage sus-

tained by or through the use of this product.

1.  It is the responsibility of the owner to ensure 

that all users of the elliptical are adequately 

informed of all precautions.

2.  Before beginning any exercise program, 

consult your physician. This is especially 

important for persons over age 35 or persons 

with pre-existing health problems.

3.  The elliptical is not intended for use by 

persons with reduced physical, sensory, or 

mental capabilities or lack of experience and 

knowledge, unless they are given supervi-

sion or instruction about use of the elliptical 

by someone responsible for their safety.

4.  Use the elliptical only as described in this 

manual. 

5.  The elliptical is intended for home use only. 

Do not use the elliptical in a commercial, 

rental, or institutional setting.

6.  Keep the elliptical indoors, away from mois-

ture and dust. Do not put the elliptical in a 

garage or covered patio, or near water. 

7.  Place the elliptical on a level surface, with at 

least 3 ft. (0.9 m) of clearance in the front and 

rear of the elliptical and 2 ft. (0.6 m) on each 

side. To protect the floor or carpet from dam-

age, place a mat under the elliptical.

8.  Inspect and properly tighten all parts each 

time the elliptical is used. Replace any worn 

parts immediately.

9.  When connecting the power cord, plug the 

power cord into a grounded circuit. 

10. Do not modify the power cord or use an 

adapter to connect the power cord to an 

improper receptacle. Keep the power cord 

away from heated surfaces. Do not use an 

extension cord.

11. Do not operate the elliptical if the power cord 

or plug is damaged, or if the elliptical is not 

working properly.

12.  

DANGER:

 

Always unplug the power 

cord and switch the power switch to the off 

position when the elliptical is not in use and 

before cleaning the elliptical. Servicing other 

than the procedures in this manual should be 

performed by an authorized service repre-

sentative only.

13. Keep children under age 13 and pets away 

from the elliptical at all times.

14. The elliptical should not be used by persons 

weighing more than 350 lbs. (159 kg).

15. Wear appropriate clothes while exercising; 

do not wear loose clothes that could become 

caught on the elliptical. Always wear athletic 

shoes for foot protection while exercising.

16. Hold the handlebars or the upper body arms 

when mounting, dismounting, or using the 

elliptical.

17. The heart rate monitor is not a medical 

device. Various factors may affect the accu-

racy of heart rate readings. The heart rate 

monitor is intended only as an exercise aid in 

determining heart rate trends in general.

IMPORTANT PRECAUTIONS

Содержание NordicTrack C9.5













































Отзывы: