background image

22

FEATURES OF THE CONSOLE

The advanced console offers an array of features 

designed to make your workouts more effective and 

enjoyable. 

The console features revolutionary iFit technology that 

enables the console to communicate with your wireless 

network. With iFit technology, you can download per-

sonalized workouts, create your own workouts, track 

your workout results, and access many other features. 

See www.iFit.com for complete information.

In addition, the console features a selection of onboard 

workouts and several iFit demo workouts. Each work-

out automatically controls the resistance of the pedals 

and the incline of the ramp and prompts you to vary 

your pedaling speed as it guides you through an effec-

tive exercise session. You can also set a customized 

workout goal with the set-a-goal workout.

When you use the manual mode of the console, you 

can change the resistance of the pedals and the incline 

of the ramp with the touch of a button. 

While you exercise, the console will display continuous 

exercise feedback. You can also measure your heart 

rate using the handgrip heart rate monitor. 

You can also browse the Internet or listen to your 

favorite workout music or audio books with the console 

sound system while you exercise.

To turn on the power,

 see this page. 

To learn how to 

use the touch screen,

 see page 23. 

To set up the 

console,

 see page 23.

 HOW TO TURN ON THE POWER

IMPORTANT: If the elliptical has been exposed to 

cold temperatures, allow it to warm to room tem-

perature before you turn on the power. If you do 

not do this, you may damage the console displays 

or other electrical components.

Plug in the power cord (see 

HOW TO PLUG IN THE 

POWER CORD on page 

18). Next, locate the 

power switch on the frame 

near the power cord. Press 

the power switch to the 

reset position.

The display will then turn on and the console will be 

ready for use.

Note: When you turn on the power for the fi rst time, 

the incline system may calibrate automatically.

 The 

ramp will move upward and downward as it calibrates. 

When the ramp stops moving, the incline system is 

calibrated.

IMPORTANT: If the incline system does not cali-

brate automatically, see step 4 on page 32 and 

manually calibrate the incline system.

IMPORTANT: The console features a display demo 

mode, designed to be used if the elliptical is dis-

played in a store. If the demo mode is turned on, 

the console will show a preset presentation when 

you fi nish exercising. To turn off the demo mode, 

see step 6 on page 30.

Reset 

Position

Содержание NordicTrack C9.5













































Отзывы: