13
9
7
4
63
9. Untie and discard the wire tie on the Main
Wire (110).
While a second person holds the Console (7)
near the Upright (4), plug the Main Wire (110)
and the Sensor Wires (63) into the receptacles
on the Console.
The connectors on the Main Wire (110) and
the Sensor Wires (63) should slide easily
into the receptacles and snap into place.
If a
connector does not slide easily into a receptacle,
turn the connector and try again.
If you do not
connect the connectors properly, the Console
(7) may become damaged when you use the
elliptical.
Insert the excess wire into the Upright (4).
110
10
10.
Tip: Avoid pinching the wires.
Attach
the Console (7) to the Upright (4) with four
M4 x 16mm Screws (101);
start all the Screws,
and then tighten them.
101
101
4
Avoid pinching
the wires
7
Содержание NordicTrack C9.5
Страница 5: ...5...
Страница 6: ...6 all STANDARD SERVICE PLANS...
