4
1
ATTACHMENT
■
Attachment (Continued)
D
Connecting the separation cable
L
The separation cables are purchased separately.
1. Pass the separation cable’s control connector and
ground wire through the supplied connector O-ring.
2. Slide the connector O-ring into the groove.
Rear panel
Separation
cable
Ground wire
Control connector
4. Firmly slide the cable bracket in place to lock the cable
inside the rear panel.
Cable bracket
5. Unfasten the grounding screw from screw hole [3], and
then using the same screw, firmly fasten the ground
wire’s terminal to ground.
6. Connect the control connector to connector [J5].
[3]
[J5]
3. Pass the separation cable’s control connector and
ground wire through the cable hole from the back of the
rear panel.
Connector O-ring
Slide
