manualshive.com logo in svg

Icom iM504, Инструкция по эксплуатации, Страница: 9 / 80

Поделиться
Скачать
Icom iM504 Скачать руководство пользователя страница 9

3

2

PANEL DESCRIPTION

u

CHANNEL SELECTOR [DIAL•ENTER]

➥

Rotate to select the operating channels, Set mode set-
tings, etc. (pgs. 6–8, 55)

➥

While pushing and holding 

[H/L]

, rotate to adjust the

brightness of the LCD and key backlight. (p. 10)

➥

Push to enter the input channel comment, selected
item, etc. (pgs. 10, 55)

➥

Rotate to check TAG channels, changes scanning di-
rection or resumes the scan manually during scan.
(p. 13)

➥

While pushing and holding 

[HAIL•RX

]

, rotate to ad-

just the audio level in RX Speaker mode. (p. 51)

➥

Push and hold for 1 sec. to display the GPS information
when a GPS receiver is connected. (p. 22)

i

CHANNEL/WEATHER CHANNEL KEY
[CH/WX•DUAL•U/I/C]

➥

Selects and toggles the regular channel and Weather
channel when pushed momentarily. (p. 7)

➥

Push and hold for 1 sec. to start Dualwatch or Tri-watch.
(p. 14)

➥

Push to stop Dualwatch or Tri-watch when either is acti-
vated. (p. 14)

➥

Move the cursor backward while in the channel com-
ment programming condition. (p. 10)

➥

While pushing and holding 

[H/L]

, push to select one of

three channel groups in sequence. (p. 7)

• U.S.A., International and Canadian channels are available.

o

SQUELCH CONTROL [SQL]

Rotate to set the squelch threshold level. (p. 8)

!0

SCAN/TAG KEY [SCAN•TAG]

(p. 13)

➥

Push to start and stop Normal or Priority scan.

➥

Push and hold for 1 sec. to set or clear the displayed
channel as a TAG (scanned) channel.

➥

While pushing and holding 

[H/L]

, push for 3 sec. to

clear or set all TAG channels in the selected channel
group.

!1

VOLUME CONTROL [VOL]

(p. 8)

Rotate to adjust the audio level.

!2

TRANSMIT POWER KEY [H/L]

➥

Push to toggle the power high or low. (p. 8)

• Some channels are set to low power only.

➥

While pushing this key, some keys perform secondary
functions.

!3

POWER KEY [POWER]

(p. 8)

➥

Push to turn power ON.

➥

Push and hold for 1 sec. to turn power OFF.

2

Содержание iM504

















































































Отзывы:

Нет отзывов