Icom iM504, Инструкция по эксплуатации

Страница: 31 / 80

25
6
DSC OPERATION
6
When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is con-
nected, steps
r
and
t
(Current position/time program-
ming) do not appear. Go to step
y
.
r
The position information appears. Set your position (lati-
tude and longitude) data by rotating
[DIAL] .
• Push [16•9] or [CH/WX•DUAL•U/I/C] to move the cursor forward
or backward, respectively.
• Rotate [DIAL] to edit N; North latitude or S; South latitude when
the cursor is on the ‘N’ or ‘S’ position, and W; West longitude or
E; East longitude when the cursor is on the ‘W’ or ‘E’ position.
• Push [CLR] for 1 sec. to clear the latitude/longitude data.
• Push [CLR] to cancel and return to the DSC menu.
t
After setting the position data, push [DIAL•ENTER] to set
the current UTC time. Set the current UTC time by rotating
[DIAL] , then push [DIAL•ENTER] .
• Push [16•9] or [CH/WX•DUAL•U/I/C] to move the cursor forward
or backward, respectively.
• Push [CLR] for 1 sec. to clear the UTC time data.
• Push [CLR] to cancel and return to the DSC menu.
y
Push [DISTRESS] for 5 sec. to transmit the distress call.
• While pushing [DISTRESS] , the key backlighting blinks.
u
After transmitting the distress call, the transceiver waits for
an acknowledgment call on Channel 70.
• The distress call is automatically transmitted every 3.5 to 4.5 min.
• After 2 sec., the transceiver is set to Channel 16 automatically.
Distress Call
TX Complete
Now Waiting for ACK
<CLR <CLR˘Cancel Cancel ACK> ACK>
After 2 sec.
25W INT
TAG
Wait ACK
<CLR˘
Cancel ACK>
CALLING
--DSC Menu--
Input UTC Time
__:__ Null
<CLR <CLR 1sec 1sec˘Null Null Data> Data>
<CLR <CLR˘Exit Exit / ENT ENT˘OK> OK>
--DSC Menu--
Input Position
Latitude
__°__.___N Null
Longitude
__°__.___W Null
<CLR <CLR 1sec 1sec˘Null Null Data> Data>
<CLR <CLR˘Exit Exit / ENT ENT˘OK> OK>