Icom iM504, Инструкция по эксплуатации, Страница: 16 / 80

10
3
BASIC OPERATION
■
Channel comments
Memory channels can be labelled with a unique alphanumeric
ID of up to 10 characters.
Capital letters, small letters, 0 to 9, some symbols (– . /) and
space can be used.
q
Select the desired channel.
• Cancel Dualwatch, Tri-watch or Scan in advance.
w
While pushing and holding [H/L] , push [16•9] to edit the
channel comment.
• A cursor and the first char-
acter start blinking alter-
nately.
e
Select the desired charac-
ter by rotating
[DIAL] .
• Push [16•9] or [CH/WX•
DUAL•U/I/C] to move the
cursor forward or backward, respectively.
r
Repeat step
e
to input all characters.
t
Push [DIAL•ENTER] to input and set the comment.
• Push [CLR] to cancel.
• The cursor and the character stop blinking.
y
Repeat steps
q
to
t
to program other channel com-
ments, if desired.
■
Microphone Lock function
The Microphone Lock function electrically locks [
Y
]/[
Z
] and
[HI/LO] keys on the supplied microphone. This prevents ac-
cidental channel changes and function access.
➥
While pushing and holding [HI/LO] on the microphone, turn
power ON to toggle the Lock function ON and OFF.
■
Display backlight
The function display and keys can be backlit for better visibil-
ity under low light conditions.
➥
While pushing and holding [H/L] , rotate [DIAL] to adjust
the brightness of the LCD and key backlight.
• The backlight is adjustable in 7 levels and OFF.
[HI/LO]
[
Y
]/[
Z
]
25W 25W INT INT
34 34°34.506N 34.506N
123 123°23.236W 23.236W
UTC UTC 12 12:00 :00PLEASURE__ PLEASURE__