10
2
INITIAL SETUP
New2001
2
BASIC MANUAL
■
Confirming the GPS signal receiving
The transceiver has a built-in GPS receiver. You can check
your current location, and transmit GPS data in the DV
mode. See the ADVANCED MANUAL for details. (Section 5)
Confirm the GPS receiver is receiving your location.
The GPS icon blinks when searching for satellites.
→
→
→
The GPS icon stops blinking when the minimum needed
number of satellites are found.
L
It may take only a few seconds to receive, or it may take
a few minutes, depending on your operating environment.
If you have difficulties receiving, we recommend that you
try a different location.
L
When
GPS Select
is set to “Manual,” the icon is not
displayed.
(MENU > GPS > GPS Set >
GPS Select
)
NOTE:
If you cannot receive GPS data, manually set the
date and time.
(MENU > Time Set >
Date/Time
)
TIP: To prolong the battery life in the GPS mode
To prolong the battery life while operating in the GPS
mode, manually update your location with the received
GPS data.
1. Confirm the GPS receiver is receiving your location
data. (See to the left).
2. Display the MANUAL POSITION screen.
(MENU > GPS > GPS Set >
Manual Position
)
3.
Push [QUICK].
•
Quick Menu window is displayed.
4. Select “Capture From GPS.”
5. Set GPS Select to “Manual.”
(MENU > GPS > GPS Set >
GPS Select
)
TIP:
The GPS log data is saved on the microSD card.
(p. 28)
Содержание ID-31A PLUS
Страница 47: ...9 D STAR GUIDE for the ID 31A PLUS ID 31E PLUS...