manualshive.com logo in svg

Icom ID-31A PLUS, Основное руководство, Страница: 39 / 84

Поделиться
Скачать
Icom ID-31A PLUS Скачать руководство пользователя страница 39

26

6

RECORDING A QSO ONTO A microSD CARD

New2001

6

BASIC MANUAL

 

■

Removing the microSD card

 

D

Removing while the transceiver is OFF

1.  Turn OFF the transceiver.

2.  Open the [micro SD] slot cover.

3.   Push in the microSD card until a click sounds, and then 

carefully pull it out.

 

L

DO NOT 

touch the terminals.

4.  Completely close the [micro SD] slot cover.

 Push in the microSD card until a 

click sounds.

Pull the microSD card out.

slot cover

slot cover

NOTE:

After removing the microSD 

card, completely close the 

[micro SD] slot cover as 

shown to the right.

Wrong

Correct

Close the cover, leaving no gap.

 

D

Removing while the transceiver is ON

 MENU > SD Card > 

Unmount  

1.  Push [MENU].

2.   Select “SD Card.”

3.  Select “Unmount.”

4.   Select <YES>.

 

•

 When the unmounting is completed, “Unmount is completed.” 

is briefly displayed, then the display automatically returns to 

the screen in step 3.

5.   Push in the microSD card until a click sounds, and then 

carefully pull it out.

 

L

See the left column for details.

[ENT]

[Down]

[Up]

Содержание ID-31A PLUS





















































































Отзывы:

Нет отзывов