manualshive.com logo in svg

Icom ID-31A PLUS, Основное руководство, Страница: 19 / 84

Поделиться
Скачать
Icom ID-31A PLUS Скачать руководство пользователя страница 19

6

2

INITIAL SETUP

New2001

2

BASIC MANUAL

New2001

 

■

  

Charging the battery pack

 

D

Charging time

 

D

Capacity of the battery pack

Icon

Battery status

The battery has suffi cient capacity.

The battery is exhausted a little.

The battery is nearing exhaustion.

Blinking The battery is almost fully exhausted.

Charger

Battery pack

BC-167S

(

Supplied

)

BC-202

(

Optional

)

BP-271

(

Supplied

)

Approximately

6 hours

Approximately

2 hours

BP-272

(

Optional

)

Approximately

9 hours

Approximately

3.5 hours

NOTE:

 

•  Prior to using the transceiver for the fi rst time, the 

battery pack must be fully charged for optimum life and 

operation.

 

•

 BE SURE

 to turn OFF the transceiver while charging 

with the supplied battery charger. Otherwise the attached 

battery pack cannot be charged.

 

•

 While charging, the charging icon “

” sequentially 

displays 11 level steps with “Charging....”

•  The icon disappears when the battery pack is completely 

charged.

NOTE: BE SURE

 to attach the 

battery pack before connecting the 

DC cable.

Turn OFF

BP-271 

(Supplied)

BC-167S*

Transceiver

To [DC IN]

To an AC outlet

 *  The shape is different, and supplied or optional depending on the 

charger version.

Содержание ID-31A PLUS





















































































Отзывы:

Нет отзывов