Icom ID-31A PLUS Скачать руководство пользователя страница 49

Страница: 49 / 84

New2001

D-STAR GUIDE

INTRODUCTION

■

What is D-STAR?

•

D-STAR is a digital protocol standard developed by

the Japan Amateur Radio League (JARL). The system

includes the DV mode for Digital Voice and the DD mode

for Digital Data communications.

•

D-STAR supports a comprehensive repeater system linked

through the Internet, enabling you to make QSOs with

stations near or far from your location.

•

D-STAR supports the DV mode at 4.8 kbps. Your call sign

data, and either a short message, or GPS data can be

transmitted simultaneously with your voice signal.

Advanced Amateur radio technology of D-STAR

The DV mode has a bandwidth of only

6 kHz, compared to 16 kHz for the

analog FM mode, with 5 kHz deviation.

D-STAR utilizes the well-know GMSK

modulation method that makes very

efficient use of occupied bandwidth.

D-STAR occupies 10 kHz. The sound quality is

good even though the bandwidth is narrow.

The regular FM mode occupies 20 kHz

that is a double the bandwidth of D-STAR.

Frequency

6 kHz

16 kHz

10 kHz

20 kHz

10 kHz

20 kHz

10 kHz

20 kHz

10 kHz

20 kHz

D-STAR (F7W)

FM (F3E)

Содержание ID-31A PLUS





















































































Результаты поиска

Содержание ID-31A PLUS

Отзывы:

Icom ID-31A PLUS, Основное руководство, Страница: 49 / 84

Результаты поиска

Содержание ID-31A PLUS

Отзывы: