1
PANEL DESCRIPTION
3
o
VFO MODE KEY [VFO (CLR) (MHz)]
➥
Push this key to cancel most functions, then push
again to select VFO mode. (p. 12)
• When making a mistake during digit input, push this
key to cancel and start from the beginning.
➥
Selects 1 MHz tuning step when pushed for 2
sec. in VFO mode. (p. 16)
➥
Partially resets the VFO frequencies, VFO set-
tings and set mode settings when pushed at turn-
ing power ON. (p. 38)
!0
DECIMAL POINT KEY [ • (DTMF•M) (
M
)]
➥
In VFO mode, push to enter the operating fre-
quency from the 100 kHz digit. (p. 14)
➥
Push this key for 2 sec. to enter DTMF memory
mode, then push again for 2 sec. to program the
DTMF memory. (p. 26)
➥
While pushing [PTT], this key sends a DTMF “E”
(
M
).
!1
DIGIT KEYS
➥
Input the specified digit during frequency input, memory
channel selection, etc.
➥
Transmit the DTMF code of the specified digit while push-
ing [PTT].
DTMF
•
M
•
M
VFO
CLR
CLR
MHz
➥
For the [1]–[5] and [0] keys, select scan edges during full/
programmed scan.
• Push [1]–[5] to select scan edges “1A/1B”–“5A/5B,” respectively.
• Push [0] to select full scan.
➥
In addition, each key has character input for memory or
DTMF memory names (characters are assigned to keys
using the same convention as for telephones). (pgs. 24, 26)
!2
TONE SCAN KEY [T SCAN (
Ω
Ω
) (#)]
➥
Push this key for 2 sec. to start the tone scan.
(p. 33)
➥
While programming memory channels or DTMF
memory names, this key moves the cursor back-
ward.
➥
While pushing [PTT], this key sends a DTMF “F”
(#).
!3
MEMORY NAME KEY [M•N (MN•W) (
≈
≈
)]
➥
Push to toggle between frequency and name in-
dications. (p. 24)
➥
While programming memory channels or DTMF
memory names, this key moves the cursor for-
ward.
➥
While pushing [PTT], this key sends a DTMF “D.”
M
•
N
MN
•
W
D
T SCAN
#
