3
FREQUENCY AND CHANNEL SETTING
14
[EXAMPLE]: Setting the frequency to 145.360 MHz.
■
Frequency or channel selection via the keypad
D
Frequency
q
Assign the main band to the desired display with [MAIN].
w
Select VFO mode with [VFO].
e
Push 6 digit keys to input a frequency.
• Push [•] to input the frequency starting from the 100 kHz digit.
• When a digit is mistakenly input, push [
(VFO)
CLR] and input from
the beginning.
• “0,” “2,” “5” and “7” are acceptable for the 1 kHz digits (depending
on the 10 kHz digit).
• Any frequency in the receive frequency range can be selected,
regardless of the operating band.
D
Memory channels
q
Assign the main band to the desired display with [MAIN].
w
Select memory mode with [MR].
e
Push 2 digit keys to select the desired memory channel.
• The first ten memory channels (00–09) are preceded by a “0.”
• To select scan edge channels, 1A to 5B, use [•
(
M
)(DTMF•M)
] for
“A” and [#
(T SCAN)
] for “B.”
• Only programmed memory channels can be selected.
[EXAMPLE]: Selecting memory channel 43 (when channel 43 is already programmed).
MAIN
MAIN
MAIN
MAIN
MR
4
3
MAIN
MAIN
MAIN
MAIN
MAIN
Decimal point appears.
VFO
1
0
4
5
3
6
