![background image](http://html1.mh-extra.com/html/icom/ic-v8000/ic-v8000_instruction-manual_2038143034.webp)
31
6
MEMORY OPERATION
Channel names can also be programmed via the mi-
crophone.
z
Select the memory/call channel to be assigned memory
names.
➥
Push [MR/CALL] to select memory mode, then select
the desired memory channel via [
Y
]/[
Z
] or keypad.
• Scan edge channels can also be selected.
➥
Push [MR/CALL] for 1 sec. to select the call channel.
x
Push [FUNC], then [
MONI
1(ANM)] momentarily.
c
Push [
SET
B(D-OFF)].
• Frequency readouts disappear.
v
Push [
Y
]/[
Z
] to selected the desired character.
• The selected character blinks.
b
Push [
SET
B(D-OFF)] or [
ENT
C(T-OFF)] to move the cur-
sor to left or right, respectively.
n
Repeat steps
b
and
n
until the desired channel names
are displayed.
m
Push [
SET
B(D-OFF)] or [
ENT
C(T-OFF)] to move the cur-
sor to left or right, respectively.
,
Push [
CLR
A(MW)] to program the name and exit channel
names programmable condition.
.
Push [FUNC], then push [
MONI
1(ANM)] to return to fre-
quency indication if desired.
[EXAMPLE]:
Programming “CLUB” into memory channel 1.
Repeat
previous
steps.
Push to select the character.
Select memory channel 1,
push , then push .
Push .
Push or to move
the cursor.