26
6
MEMORY OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■
Programming a memory channel via the microphone
[EXAMPLE]:
Programming 145.870 MHz into memory channel 20 (blank channel) via the microphone.
Push
Push
Push then momentarily.
Push
Push then 1 sec. and continue to pushing
➠
Beep
Beep
Beep
“
“
“
“
“
The microphone can also be used to program mem-
ory channels.
z
Set the desired frequency in VFO mode.
➥
Push [VFO/LOCK] to select VFO mode.
➥
Set the frequency using the keypad.
➥
Set other data
(e.g. offset frequency, duplex direction, sub-
audible tone encoder ON/OFF and its frequency)
, if neces-
sary.
x
Push [FUNC], then [
CLR
A(MW)] momentarily.
c
Select the memory channel to be programmed.
➥
Push [
Y
] or [
Z
] to select the memory channel
(direct nu-
meral input cannot be used)
.
v
Push [FUNC] then [
CLR
A(MW)] for 1 sec. to program.
➥
3 beeps may sound and the VFO contents (including
the subaudible tone frequency, etc.) are programmed.
➥
Memory channel number advances when continuing to
push [
CLR
A(MW)] after programming.
MW