manualshive.com logo in svg

Icom IC-V8000, Инструкция по эксплуатации, Страница: 18 / 53

Поделиться
Скачать
Icom IC-V8000 Скачать руководство пользователя страница 18

15

3

SETTING A FREQUENCY

■

Lock functions

To prevent accidental channel changes and unnecessary
function access, use the lock function. The transceiver has 2
different lock functions.

D

Frequency lock

This function locks the tuning dial and switches electronically
and can be used together with the microphone lock function.

➥

Push [SET(LOCK)] for
1 sec. to turn the lock func-
tion ON and OFF.

• [PTT], [MONI(ANM)], [VOL]

and [SQL] can be used while
the channel lock function is in
use. Also, TONE-1, TONE-2,
DTMF tones or DTMF mem-
ory contents can be transmit-
ted from the microphone.

➥

Push [VFO/LOCK] for 1 sec. to switch the
lock function ON and OFF.

D

Microphone keypad lock

This function locks the microphone keypad.

➥

Push [FUNC] then [

SQL

Z

D(16KEY-L)] to

switch the microphone keypad lock function
ON and OFF.

• [PTT], [VFO/LOCK], [MR/CALL], [BANK/OPTION],

[

Y

], [

Z

], [F-1], [F-2], [DTMF-S] and [FUNC] on the

microphone can be used.

• All switches on the transceiver can be used.
• The keypad lock function is released when the

power is turned OFF then ON again.

16KEY-L

VFO/LOCK

Push [SET(LOCK)] for 1 sec.

Appears

Содержание IC-V8000






















































Отзывы:

Нет отзывов