![background image](http://html1.mh-extra.com/html/icom/ic-u80/ic-u80_instruction-manual_2038107062.webp)
New2001
D
VOX-related settings
The VOX gain, the VOX delay, and the VOX time-out timer can
be set in the Set mode.
q
Connect an optional headset and plug adapter cable to the
transceiver, and then turn ON the power.
w
Push
[FUNC](
M
), and then
[VOX](2) to turn ON the VOX
function.
e
Push
[FUNC](
M
), and then
[SET](8) to enter the Set mode.
r
Push
[
p
] or [
q
] to select the VOX gain (VOX), the VOX
delay (VXd), or the VOX time-out timer (Vto) item.
t
Rotate
[VOL] to select a desired option.
y
Push
[# ENT] to exit the Set mode.
The VOX function does not activate transmission while in
the Set mode.
•
VOX gain
The VOX gain level can be adjusted between 1 (minimum) and
10 (maximum), or turned OFF. Higher values make the VOX
function more sensitive to your voice.
(default: VOX.05)
While speaking into the headset
microphone, adjust the VOX gain
until “On” continuously appears
on the LCD.
If “On” is intermittent, be sure the VOX delay is set long
enough to allow normal pauses in speech, but keep the
VOX ON until you finish speaking.
✔
CONVENIENT!
While transmitting using the VOX function, you can adjust the
VOX gain simply by rotating
[DIAL].
•
VOX delay
Sets the VOX delay to between 0.5 and 3.0 seconds (in 0.5
seconds steps). The VOX delay is the amount of time the
transmitter stays ON after you stop speaking.
(default: VXd.10)
The VOX delay is set to
1 second.
The VOX delay is set to
3 seconds.
•
VOX time-out timer
Sets the VOX time-out timer to 1, 2, 3, 4, 5, 10 or 15 minutes,
to prevent accidental prolonged transmission for the VOX
function.
To turn OFF the function, select “Vto.OF.”
(default: Vto.03)
The VOX time-out timer must be set shorter than the time-
out timer, otherwise this timer will not be activated.
14
OPTIONS
The VOX function is
turned OFF.
The VOX gain is set to
10 (maximum).
Appears
56