43
10
10
SET MODES
D
VOX delay
Sets the VOX Delay to “VXd.05” (0.5 seconds), “VXd.10”
(1 second), “VXd.15” (1.5 seconds), “VXd.20” (2 seconds),
“VXd.25” (2.5 seconds) or “VXd.30” (3 seconds).
The VOX Delay is the amount of time the transmitter stays
ON after you stop speaking.
(default: VXd.10)
D
VOX time-out timer
Sets the VOX time-out timer to 1, 2, 3, 4, 5, 10 or 15 minutes
to prevent accidental prolonged transmission for the VOX
function.
To turn OFF the function, select “Vto.OF.”
(default: Vto.03)
The VOX time-out timer must be set shorter than the time-
out timer, otherwise this timer will not be activated.
D
DTMF TX key
Selects the method to transmit a DTMF code sequence.
While holding down
[PTT], push [0] to [9], [MONI](A), [
p
]
(B),
[
q
](C), [VFO/MR/CALL](D), [
M
](E), or [# ENT](F).
• dmt.k
: Transmits the appropriate DTMF code assigned to the
key.
(default)
• dmt.m
:
Transmits the programmed DTMF code sequence in
the DTMF memory channel assigned to the key.
• dmt.t
: No DTMF code can be transmitted. However, while
holding down
[PTT], push either the [
p
] or [
p
] to
transmit a 1750 Hz tone burst signal.
D
Operating mode
Set the operating mode to FM or FM-N. The operating mode
is determined by the width of the modulation of the radio
signals.
(default: W/n. W)
FM mode
FM-N mode
1
2
3
4
5
6
7
8
9
11
12
13
14
15
16
17
18
19