47
10
10
SET MODES
D
LCD contrast
Selects the LCD contrast.
• Lcd.LO
: Sets the contrast to low.
• Lcd.At
: Sets the contrast to high. However, if the transceiver is
exposed to high temperatures, it automatically sets the
contrast to low. (default)
D
Power save
The power save function allows you conserve battery life by
reducing the duty cycle of the receiver. Select the ratio of the
power save time to the standby time.
To turn OFF the function, select “P–S.OF.”
• P–S.OF : Turns OFF the function.
• P–S. 2
: Sets the duty cycle to 1:2. (ON: 0.1 seconds, OFF: 0.2
seconds)
• P–S. 8
: Sets the duty cycle to 1:8. (ON: 0.1 seconds, OFF: 0.8
seconds)
• P–S.16 :
Sets the duty cycle to 1:16. (ON: 0.1 seconds, OFF: 1.6
seconds)
• P–S.At
: Automatically sets the duty cycle. (default)
When no operation occurs, and no signal is received
for 5 seconds, the transceiver enters the Power
Save mode, and sets “1:2” as the duty cycle. After 60
seconds of no activity, it sets “1:16” as the duty cycle.
D
Select speed
The tuning speed acceleration automatically speeds up the
tuning speed when rotating
[VOL] rapidly.
• S–S. m
: Turns OFF the tuning speed acceleration.
• S–S. At : Turns ON the tuning speed acceleration. (default)
1
2
3
4
5
6
7
8
9
11
12
13
14
15
16
17
18
19
