28
6
MEMORY/CALL OPERATION
■
Clearing memory contents
The contents of programmed memories can be cleared
(erased).
q
Push
[FUNC](
M
), and then push
[VFO/MR/CALL].
w
Push
[
p
] or [
q
] to select a channel to be cleared.
e
Perform the following operation within 1.5 seconds, other-
wise the transceiver returns to the memory mode without
clearing memory.
➥
Push
[FUNC](
M
), and then momentarily push
[VFO/
MR/CALL].
➥
Push
[FUNC](
M
), and then hold down
[VFO/MR/CALL]
for 1 second.
• The channel contents are cleared.
r
Push
[VFO/MR/CALL] to return to the previous mode.
NOTE: Be careful!— the contents of cleared memories
CANNOT be recalled.
■
Display type
During memory mode operation, the transceiver has three
display types to suit your operating style.
Set the display type in the Initial Set mode. (p. 46)
“Frequency display”
Displays the programmed frequency.
“Channel number display”
Displays the memory channel num-
ber. Only programmed channels are
displayed, and modes other than the
memory mode cannot be selected.
• When the channel number display type is selected, only the follow
-
ing functions can be performed.
- Scan function (p. 31)
- Out put power setting (p. 19)
- DTMF memory function (p. 36) - Key lock function (p. 18)
- The scan pause timer setting, the function key timer setting, the
LCD backlight setting, the VOX-related settings, the microphone
gain setting, and the DTMF TX key setting in the Set mode.
“Channel name display”
Displays the channel name you have
assigned. Only programmed chan-
nels are displayed.
• If no channel name is programmed, the programmed frequency will
be displayed.
• Push
[MONI] to display the operating frequency.
