Icom IC-T3H, Инструкция по эксплуатации

Страница: 52 / 68

■
Set mode
D D
Entering set mode
q
Push [A•
FUNC
], then push [8•
SET
].
w
Push [ ∫ ] or [ √ ] to select the desired item.
e
Rotate [VOL] to select the condition/value.
• To exit set mode, push [#•
ENT
].
D D
Repeater tone frequency
Selects tone encoder frequency for accessing
a repeater, etc. from one of 50 available fre-
quencies.
• 67.0–254.1 Hz (50 tones): 88.5 Hz (default)
D D
Tone squelch frequency
Selects frequency for tone squelch or pocket
beep operation from one of 50 available fre-
quencies.
• 67.0–254.1 Hz (50 tones): 88.5 Hz (default)
D D
DTCS code
Selects DTCS encoder/decoder code with po-
larity (N: normal/I: inverse) from one of 208
available codes.
• 023N/I–754N/I: 023N (default)
D D
Offset frequency
Sets the offset frequency for duplex (repeater)
operation within 0–20.00 MHz range.
D D
Reverse function
Turns the reverse function ON and OFF.
• Default: OFF
MR
F
TX
MR
F
TX
MR
F
D TX
MR
F
TX
MR
F
TX
45
11
OTHER FUNCTIONS
IC-T3H.qxd 03.2.6 10:18 Page 45 (1,1)