Icom IC-T3H, Инструкция по эксплуатации

Страница: 51 / 68

44
10
PAGER/CODE SQUELCH
■
Code squelch
Code squelch provides communications with quiet standby since
you will only receive calls from stations which know your ID or
group code. Each push of [PTT] sends a 3-digit code in order to
open the receiving station’s code squelch prior to voice transmis-
sion.
q
Set the operating frequency.
• Set the AF and squelch to the desired level as in normal operation.
w
Push [A•
FUNC
], then push [
✱
•
OPTION
].
• Repeat several times, if necessary.
• Code squelch mode is selected.
• 100 MHz digit shows “C.”
e
Select the desired transmit code channel:
➥
Push [A•
FUNC
], then push [8•
SET
].
➥
Rotate [VOL] to select the desired code channel.
➥
Push [#•
ENT
] to exit code set mode.
r
Operate the transceiver in the normal way (push [PTT] to trans-
mit; release [PTT] to receive).
t
To cancel the code squelch, push [A•
FUNC
], then push [
✱
•
OP
-
TION
].
• 100 MHz digit shows “1” when the function is cancelled.
Optional UT-108 required
MR
F
TX
IC-T3H.qxd 03.2.6 10:18 Page 44 (1,1)