Icom IC-T3H, Инструкция по эксплуатации

Страница: 40 / 68

33
8
SCAN OPERATION
■
Scan resume condition
When a signal is received during
scanning, the scan resume condition
determines what action the transceiver
takes. The transceiver has 2 scan
resume conditions available as
illustrated at right. Use
SET MODE
to
select the one which best suits your
needs.
q
Push [A•
FUNC
], then push [8•
SET
] to enter
SET MODE
.
w
Push [
Y
]/[
Z
] several times until “SCP” or “SCt” appears.
e
Rotate [VOL] to select the desired scan resume condition.
• Pause scan: When receiving a signal, scan
pauses on the signal until it disappears. Re-
sumes 2 sec. after the signal disappears.
Timer scan: When receiving a signal, scan
pauses on the signal for 5 sec., 10 sec. or
15 sec., then resumes.
r
Push [#•
ENT
] to set and exit
SET MODE
.
USING
SET MODE
Pause
scan
Receiving
a signal
Timer
scan
5, 10 or 15 sec.
2 sec.
MR
F
TX
MR
F
TX
Timer scan
Pause scan
IC-T3H.qxd 03.2.6 10:18 Page 33 (1,1)