Icom IC-R5, Инструкция по эксплуатации

Страница: 78 / 80

New2001
q w e r
■
Memory channel programming
Set the desired frequency and other functions in VFO mode. Push [V/M
•S.MW
•
~
] for 1 sec.
to enter select memory write condition.
• 1 short and 1 long beeps sound.
Rotate [DIAL] to select the desired memory channel number
.
Push [V/M
•S.MW
•
~
] for 1 sec.
again to program the contents into the selected channel.
• 3 beeps sound.
q w e
■
Scan skip setting
Push [V/M
•S.MW
•
~
] to select
memory mode. Rotate [DIAL] to select the desired memory channel. While pushing [FUNC], push [V/M
•S.MW
•
~
] to set the skip
setting (skip channel or skip frequency) ON and OFF
.
q w
■
VFO scans
Push [V/M
•S.MW
•
~
] to select
VFO mode. Push [MODE
•SCAN] for 1 sec.
• One of scan type
“ALL,
”
“BAND
” or
“PROG xx
” (xx= 0
–
24) appear
.
e r
Rotate [DIAL] to select the desired scan type. Push [MODE
•SCAN] momen
-
tarily to start scan.
• Rotate [DIAL] to change the scanning
direction.
• During scan, push [V/M
•S.MW
•
~
]
to start auto memory write scan.
Push [MODE
•SCAN] momen
-
tarily again to stop scan.
q w
■
Memory scans
Push [V/M
•S.MW
•
~
] to select
memory mode.
• Push [BAND
• ] to select a bank,
if desired.
Push [MODE
•SCAN] for 1 sec.
• One of scan type
“ALL
” or
“BANK
”
appear
, for bank scan. Rotate [DIAL]
to select the desired scan type, in this case.
• When memory mode is selected at
step
q
, memory scan starts.
e r
Push [MODE
•SCAN] momen
-
tarily to start bank scan.
• Rotate [DIAL] to change the scanning
direction.
Push [MODE
•SCAN] momen
-
tarily again to stop scan.
IC-R5_1.qxd 02.10.23 11:29 Page 67 (1,1)