Icom IC-R5, Инструкция по эксплуатации

Страница: 42 / 80

31
6
SCAN OPERATION
New2001
D D
Scan pause timer
The scan pauses when receiving signals according to the
scan pause time. It can be set from 2–20 sec. or unlimited.
q
Push [TS•SET] for 1 sec. to enter set mode.
w
Rotate [DIAL] to select “EXPAND” item.
e
While pushing [FUNC], rotate [DIAL] to turn the expand set
mode selection ON.
r
Rotate [DIAL] to select “PAUSE” item.
t
While pushing [FUNC], rotate [DIAL] to set the desired
scan pausing time from 2–20 sec. (2 sec. steps) and
“HOLD.”
• “2SEC”–“20SEC”: Scan pauses 2–20 sec. while receiving a sig-
nal.
• “HOLD” : Scan pauses on a received a signal until it
disappears.
y
Push [TS•SET] to exit set mode.
D D
Scan resume timer
The scan re-starts after a signal disappears according to the
resume time. it can be set from 0–5 sec. or unlimited.
q
Push [TS•SET] for 1 sec. to enter set mode.
w
Rotate [DIAL] to select “EXPAND” item.
e
While pushing [FUNC], rotate [DIAL] to turn the expand set
mode selection ON.
r
Rotate [DIAL] to select “RESUME” item.
t
While pushing [FUNC], rotate [DIAL] to set the desired
scan pausing time from 0–5 sec. (1 sec. steps) and
“HOLD.”
• “0SEC” : Scan restarts immediately after the signal dis-
appears.
• “1SEC”–“5SEC” : Scan restarts 1–5 sec. after the signal disap-
pears.
• “HOLD” : Scan restarts by rotating [DIAL] only.
y
Push [TS•SET] to exit set mode.
[TS•SET]
[FUNC]
[DIAL]
• Resume timer setting
Setting indication
After 1 sec. [TS•SET]
[FUNC]
[DIAL]
• Pause timer setting
Setting indication
After 1 sec.
■
Scan resume condition
USING
EXPANDED SET MODE
IC-R5_1.qxd 02.10.23 11:29 Page 31 (1,1)