Icom IC-R5, Инструкция по эксплуатации

Страница: 61 / 80

50
10
OTHER FUNCTIONS
New2001
10
D D
Weather alert function
NOAA broadcast stations transmit weather alert tones before
important weather announcements. When the weather alert
function is turned ON, the selected weather channel is moni-
tored each 5 sec. for the announcement. When the alert sig-
nal is detected, the “AL.T” and the WX channel are displayed
alternately and sounds a beep tone until the receiver is oper-
ated. The previously selected (used) weather channel is
checked periodically during standby or while scanning.
q
Select the desired weather channel.
w
Turn the weather alert function ON in set mode.
➥
Push [TS•SET] to enter set mode.
➥
Rotate [DIAL] to select the weather alert item, then ro-
tate [DIAL] while pushing and holding [FUNC] to set
ON.
➥
Push [TS•SET] to exit set mode.
e
Set the desired stand-by condition.
• Select VFO or memory channel.
• Scan or priority watch operation can also be selected.
r
When the alert is detected, a beep sounds and the follow-
ing indication will be displayed.
t
Turn the weather alert function OFF in set mode.
NOTE: While receiving a signal (on a frequency other than
the weather alert ON frequency), the receiving signal or
audio will be interrupted momentarily every 5 sec.
(approx.)
in case the alert function is turned ON. This symptom is
caused by the WX alert function. To cancel these symp-
toms, set the weather alert item OFF in set mode.
FM FM
Show above indications alternately.
IC-R5_1.qxd 02.10.23 11:29 Page 50 (1,1)