Icom IC-R5 Скачать руководство пользователя страница 63

Страница: 63 / 80

OTHER FUNCTIONS

New2001

Cloning using a personal computer

Data can be cloned to and from a personal computer (Mi-
crosoft

Windows

98/Me/2000/XP) using the optional CS-R5

CLONING SOFTWARE

and the optional OPC-478U

CLONING

CABLE

. Consult the CS-R5

CLONING SOFTWARE

HELP file for

details.

Cloning error

☞

NOTE: DO NOT

push any key on the sub-receiver during

cloning. This will cause a cloning error.

When the display appears as below, a cloning error has oc-
curred.

In such a case, both receivers automatically return to the
clone standby condition and cloning must be repeated.

■

Auto power-off function

The IC-R5 can be set to automatically turn OFF after a spec-
ified period in which no operation is performed.

120 min., 90 min., 60 min., 30 min. and OFF can be specified.
The specified period is retained even when the receiver is
turned OFF by the auto power-off function. To cancel the
function, select “OFF” in step

below.

Push [TS•SET] for 1 sec. to enter set mode.

Rotate [DIAL] to select “AP OFF” item.

• Turn the expanded set mode ON for selection. (p. 39)

While pushing [FUNC], rotate [DIAL] to select the desired
time or to turn the function OFF.

Push [TS•SET] to exit set mode.

[TS•SET]

[FUNC]

[DIAL]

After 1 sec.

USING

EXPANDED SET MODE

Microsoft and Windows are registered trademarks of Microsoft Corporation in
the U.S.A. and other countries.

IC-R5_1.qxd 02.10.23 11:29 Page 52 (1,1)

Содержание IC-R5

















































































Результаты поиска

Содержание IC-R5

Отзывы:

Похожие инструкции для IC-R5

Бренды по названию

Популярные бренды

Icom IC-R5, Инструкция по эксплуатации

Результаты поиска

Содержание IC-R5

Отзывы:

Похожие инструкции для IC-R5

Бренды по названию

Популярные бренды