Icom IC-F6062D, Руководство по эксплуатации, Страница: 28 / 32

25
3
dPMR OPERATION
D Transmitting a Kill Call
A Kill call allows you to send a command that will disable the
target station.
q
Push
[dPMR Button]
to enter the ID selection mode.
• The pre-programmed ID is displayed.
w
Push [CH Up] or [CH Down] to select a desired Individual
ID.
e
Push [dPMR Button] again to enter the application selec-
tion mode.
• “ STATUS ” is displayed.
r
Push [CH Up] or [CH Down] to select “ KILL .”
t
Push
[Call]
to transmit a Kill call to the selected station.
• “ WAIT ” is displayed while transmitting.
• “
OK
” is displayed when an acknowledgement is received.
• “ FAILED ” is displayed when no acknowledgment is received.
y
After a specified time period, the transceiver will return to
the stand-by mode.
D Transmitting a Revive Call
A Revive call allows you to send a command that will revive
the (stunned) station.
q
Push
[dPMR Button]
to enter the ID selection mode.
• The pre-programmed ID is displayed.
w
Push [CH Up] or [CH Down] to select a desired Individual
ID.
e
Push [dPMR Button] again to enter the application selec-
tion mode.
• “ STATUS ” is displayed.
r
Push [CH Up] or [CH Down] to select “ REVIVE .”
t
Push
[Call]
to transmit a Revive call to the selected sta-
tion.
• “
WAIT
” is displayed while transmitting.
• “ OK ” is displayed when an acknowledgement is received.
• “
FAILED
” is displayed when no acknowledgment is received.
y
After a specified time period, the transceiver will return to
the stand-by mode.