14
3
dPMR OPERATION
3
16
15
14
13
12
11
10
9
8
7
6
5
4
2
1
14
D
Receiving a Group call
q
When a Group call is received:
• Rings sound.
• “
” appears and the mute is released.
• “
” appears or blinks, depending on the pre-programmed set-
tings.
• The Talkgroup ID (or name) and the calling station’s ID (or name)
blink.
• When an All Call is received, “
ALL CALL
” blinks instead of “
TG
”
and the Talkgroup ID.
T G
0 1 0 0 0 0 0
I D
0 0 0 0 0 0 1
Calling station’s ID
Talkgroup ID
Appears or blinks
Appears
w
While holding down
[PTT]
, speak into the microphone at
your normal voice level.
NOTE:
Only one station is allowed to speak at the
same time.
e
Release
[PTT]
to receive.
r
After the communication is finished, push
[Clear]
to send
a ‘Disconnect’ signal to terminate the connection.
• Either station can send a ‘Disconnect’ signal.
• “
” disappears, “
CLR DOWN
” appears for approximately 2
seconds, and the transceiver automatically returns to the
stand-by mode.
D
Receiving a status message
q
When a status message is received:
• Rings sound.
• The calling station’s ID (or name) and the status message
blink.
R X
S T A T U S
0 1
I D
0 0 0 0 0 0 1
The received
status message
Calling station’s ID
w
Push
[Clear]
to return to the stand-by mode.