![background image](http://html1.mh-extra.com/html/icom/ic-f6062d/ic-f6062d_operating-manual_4282784018.webp)
15
3
dPMR OPERATION
D
Receiving an SDM
q
When an SDM is received:
• Rings sound.
• “
” appears.
• The calling station’s ID (or name) and the SDM are displayed.
M e s s a g e
1
I D
0 0 0 0 0 0 1
The received
SDM
Appears
Calling station’s ID
NOTE:
When the SDM includes more than 12 charac-
ters, it automatically scrolls.
• Push
[Status Up]
or
[Status Down]
to stop scrolling, or
manually scroll the message.
R E T U R N
F I C E
T O
O F
I D
0 0 0 0 0 0 1
Scrolls
w
Push
[Clear]
to return to the stand-by mode.
D
Receiving a Stun, Kill or Revive call
If an Individual call with a Stun or Kill command is received
from a specified station, the transceiver will display “SORRY,”
and becomes unusable.
NOTE:
If the transceiver receives a Stun, Kill, or Revive
command from a station other than the specified ones, the
call will be ignored, and the transceiver will not be stunned,
killed, or revived.
➥
When a Stun command is received, the transceiver is
disabled*
1
. In that case, receiving a Revive command or
inputting the password*
2
is necessary to operate the trans-
ceiver again.
*
1
Depending on the pre-programmed settings, receiving a Stun
command inhibits only transmission, but the transceiver still
can receive.
*
2
Depending on the pre-programmed settings.
➥
When a Kill command is received, the transceiver is disa-
bled. In that case, re-programming the transceiver is nec-
essary to operate the transceiver again.
D
Receiving a Status Polling call
If a Status Polling call is received, the transceiver will auto-
matically transmit its current status.