21
3
dPMR OPERATION
D
Transmitting an SDM
You can send a pre-programmed SDM to an individual station
or to group stations.
The transceiver has 10 memories to store messages.
q
Push
[dPMR Button]
to enter the ID selection mode.
• The pre-programmed ID is displayed.
w
Push
[CH Up]
or
[CH Down]
to select a desired Individual
ID or Talkgroup ID.
e
Push
[dPMR Button]
again to enter the application selec-
tion mode.
• “
STATUS
” is displayed.
r
Push
[CH Up]
or
[CH Down]
to select “
MESSAGE
.”
t
Push
[dPMR Button]
again to enter the SDM selection
mode.
• “
” appears.
• The pre-programmed SDM is displayed.
y
Push
[CH Up]
or
[CH Down]
to select a desired SDM.
• You can edit or change the contents of the SDM. See the next
page for details.
M E S S A G E
0 1
M e s s a g e
1
An SDM is displayed.
Appears
u
Push
[Call]
to transmit the SDM to the selected station or
talkgroup.
• “
WAIT
” is displayed while transmitting.
• “
OK
” is displayed when an acknowledgement is received.
• “
FAILED
” is displayed when no acknowledgment is received.
i
After a specified time period, the transceiver will return to
the stand-by mode.