10
2
BIIS 1200 OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
• Usable characters
Key
[0]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
Characters
0 ! ? ' " , ; : _ ( ) < > [ ]
1 (space) # * / + - = & % $ @ ^
2 A B C a b c
3 D E F d e f
4 G H I g h i
5 J K L j k l
6 M N O m n o
7 P Q R S p q r s
8 T U V t u v
9 W X Y Z w x y z
/
!
NOTE:
Messages can be edited also using a PC editing
program. Ask your dealer for details.
D
Transmitting an Emergency call
If an MSK channel is used as the Emergency channel, the
transceiver can access the BIIS emergency mode.
If your transceiver is programmed for Silent operation, you
can transmit Emergency calls without the beep sounding or
the display changing.
q
Hold down
[Emergency]
for the pre-programmed time pe-
riod to enter the emergency mode.
• Countdown beeps start.
• To exit the emergency mode, hold down
[Emergency]
for the
pre-programmed period before the end of the count-down time
period.
w
When the time period ends, the transceiver automatically
starts an Emergency call cycle, once or repeatedly, de-
pending on the pre-programmed repeat cycle setting.
e
In an Emergency call cycle, the transceiver automatically
transmits Status 22 (Emergency) to inform the dispatcher
that the user is in an emergency situation.
• “
WAIT
” appears while transmitting.
• “
OK
” is displayed when an acknowledgement is received.
• “
FAILED
” is displayed when no acknowledgment is received.
NOTE:
Depending on the pre-programmed settings,
the transceiver does not transmit Status 22 in the re-
peated cycles.
r
After the Emergency call cycles have ended, the trans-
ceiver automatically returns to the stand-by mode.
• To exit the emergency mode manually, turn OFF the power, and
turn ON it again.