6
NXDN OPERATION <COMMON>
6-3
Memory Stack
The transceiver has a Memory Stack. When the trans-
ceiver receives a Status Message or a Short Message,
the received content is stored in the transceiver’s Mem-
ory Stack.
If you turn OFF the transceiver’s power, the contents
will be cleared.
The stored messages are displayed using the following
indication.
Information
Indication
Message type
Caller ID Stack
“ID”
Status Message
“ST”
Short Message
“SM”
Stored number
Stored number
“01” to “15”
Display items
Caller ID
“ID”
Message contents
“MSG”
Received channel or GID
“CH”
Viewing a stored message
D
When a transceiver receives data:
q
• Displays “DATA RCVD,” “COMPLETE,” the received mes
-
sage, the caller’s unit ID and GID*.
*Displays only when the received call is a Group call.
• “
” blinks.
Push [Stack].
w
• Enters the Memory Stack mode.
• Displays “STACK.”
Push [UP] or [DOWN] to select a desired message.
e
Push [P2](DISP) to change the displayed item be-
r
tween received ID, message contents and channel
number.
STACK
SM01 ID
STACK
UID 0001
Scrolls
STACK
SM01 MSG
STACK
SHORT MESSAG
STACK
SM01 CH
STACK
CH CH01
Received ID
Message contents
Channel number
Push [P1](EXIT).
t
• Exits the Memory Stack mode.
