1
PANEL DESCRIPTION
1-8
Programmable function keys
Public Address
“PUBA”
Turns the Public Address function ON or OFF.
When this function is ON, you can make announce-
ment through a PA speaker.
• Transmitting is disabled while in the PA mode.
Scan
“SCAN”
Starts or stops a scan.
Scan Delete/Add
“SCNE”
Sets or cancels the selected channel or GID as a scan
target.
Scrambler/Encryption
“SCRM”
❍
In the Analog mode
Turns the Scrambler function ON or OFF.
❍
In the NXDN Conventional system or
the NXDN Trunking system
Turns the Encryption function ON or OFF.
Scrambler/Encryption Code
This function is for the hold down operation of [Scram-
bler/Encryption].
❍
In the Analog mode
Enters the Scrambler Code mode.
❍
In the NXDN Conventional system or
the NXDN Trunking system
Enters the Encryption Code mode.
SDM (NXDN)
“SMSG”
❍
In the NXDN Conventional system or
the NXDN Trunking system
Directly enters the Short Message mode.
Push [PTT] to send a Short Message to a Base ID.
Send the GPS data
“GPSD”
❍
In the NXDN Conventional system or
the NXDN Trunking system
Sends the position data that is received from the GPS
receiver to a Base station.
Site Down
“SIDN”
❍
In the NXDN Trunking system
Selects the previous site number.
If the site name is not entered, [Site Down] does not
function.
Site Lock
“SILK”
❍
In the NXDN Trunking system
Turns the Site Lock function ON or OFF.
Site Select
This function is for the hold down operation of [Site
Lock].
❍
In the NXDN Trunking system
Enters the Site Select mode.
If the site name is not entered, [Site Select] does not
function.
Site Up
“SITU”
❍
In the NXDN Trunking system
Selects the next site number.
If the site name is not entered, [Site Up] does not func-
tion.
Squelch Level
“SQLL”
❍
In the Analog mode
Enters the Squelch Level Adjustment mode.
Squelch Off
“SQLO”
❍
In the Analog mode or
NXDN Conventional system
Opens the squelch, and releases the mute.
Squelch Off Momentary
“SQLM”
❍
In the Analog mode or
NXDN Conventional system
While holding down, opens the squelch, and releases
the mute.
Stack
“STAK” (p. 6-3)
Enters the Memory Stack mode.
Status (NXDN)
“STAT”
Enters the Status Message mode.
Push [PTT] to send a Status to a Base ID.
Talk Around
“TLKA”
Turns the Talk around function ON or OFF.
• The Talk around function equalizes the transmit frequency
to the receive frequency for transceiver-to-transceiver com-
munication.
Transceiver Password
“PSWD” (p. 2-2)
Enters the password entry mode.
The transceiver cannot be used until you enter a cor-
rect password.
Zone Delete/Add
“ZODE”
Sets or cancels the selected zone as a scan target.
Zone Down
“ZNDN”
Selects the previous zone number.
Zone Up
“ZNUP”
Selects the next zone number.
• For [
R
], [P0], [P1], [P2], [P3], [UP] and [DOWN] (Continued)
