Icom IC-F5360D, Руководство по эксплуатации

Страница: 39 / 67

5
MENU SCREEN
5-9
Menu functions (Continued)
Status (NXDN) “STATUS”
Directly enters the Status Message mode.
When “STATUS” is displayed, push [P1](ENT).
q
Push [UP] or [DOWN] to select a status message.
w
• If you want to directly enter a status message, push [P2]
(MODE) to select the Status Message Entry mode.
You can enter a status message between 1 and 207.
• You can use the 10-keypad keys on the optional DTMF
microphone.
Push [P3](TX) to send the message to the Base ID.
e
Push [P1](EXIT) to exit.
r
Talk Around “TALK AROUND”
❍
In the Analog mode
Turns the talk around function ON or OFF.
When “TALK AROUND” is displayed, push [P1]
q
(ENT).
Push [UP] or [DOWN] to select ON or OFF.
w
Push [P1](OK) to save.
e
Transceiver Password
“PASSWORD”
Enters the Password Entry mode.
The transceiver cannot be used until you enter a cor-
rect password.
When “PASSWORD” is displayed, push [P1](ENT).
q
• Enters the Password Entry mode.
Push [UP] or [DOWN] to enter a digit code, and
w then
push [P1] to set.
• Goes to the next digit entry position.
Repeat step
e w
until you enter the password, and
then push [P1].
When using the DTMF microphone:
Push the [0] to [9] digit keys on the microphone to enter
the password, and then push [#].
NOTE: If “PASSWORD” does not disappear after
pushing [P1], the password code you entered may
be incorrect. In this case, enter the correct pass-
word.
TX Audio Equalizer “TX AUDIO EQ”
This function sets the audio characteristics type to ap-
ply to the transmit audio.
When “TX AUDIO EQ” is displayed, push [P1](ENT).
q
Push [UP] or [DOWN] to select the option.
w
• Push [P0](BACK) to return to the previous screen.
• FLAT:
Selects the standard audio characteristics.
• HIGH BOOST:
Selects the audio characteristics emphasizing
the treble range.
• LOW BOOST:
Suppresses the treble range and boosts the
bass range.
Push [P1](EXIT) to save.
e
TX Auto Gain Control
“TX AUTO GAIN”
This function automatically adjusts the transmit audio
level to an appropriate constant level so that the called
station can hear the audio clearly.
When “TX AUTO GAIN” is displayed, push [P1](ENT).
q
Push [UP] or [DOWN] to select ON or OFF.
w
• Push [P0](BACK) to return to the previous screen.
• ON: Enables the Auto Gain Control. The transmit
audio level will be adjusted to an appropriate
constant level.
• OFF: Disables the Auto Gain Control.
Push [P1](EXIT) to save.
e
TX Noise Suppressor “TX NOISE SUP”
This function enables transmitting while in the digital
mode and reducing or eliminating the noise component
in the background noise.
When “TX NOISE SUP” is displayed, push [P1]
q
(ENT).
Push [UP] or [DOWN] to select ON or OFF.
w
• Push [P0](BACK) to return to the previous screen.
Push [P1](EXIT) to save.
e
Zone Delete/Add “ZONE DEL/ADD”
Sets or cancels the selected zone as a scan target.
Select a desired zone. (p. 2-3)
q
Push [MENU].
w
• Opens the Menu screen.
When “ZONE DEL/ADD” is displayed, push [P1]
e
(ENT).
Push [UP] or [DOWN] to select “DELETE” or “ADD.”
r
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK).
t
• The selected zone is canceled as a scan target when
“DELETE” is selected in step
r
.
• The selected zone is set as a scan target when “ADD” is
selected in step
r
.