22
5
OTHER FUNCTIONS
■
PTT quick call
The PTT quck call provdes smple callng.
Pushng [PTT] only makes a call wth the dsplayed ID, even
ndvdual, group, despatcher, status or call back.
NOTE:
The PTT quck call wll not functon when [Call Set
Up] s assgned to some functon key. Do not assgn [Call
Set Up] when PTT quck functon s used.
■
Call back function
Use ths functon when the called staton cannot be reply the
call mmedately.
Push and hold [Call Back] to toggle the call back functon ON
and OFF.
When the call back function is turned ON:
The called staton sendng backs the “Call Back” message to
the callng staton.
• “
” appears and the callng staton code s stored nto the
call back memory.
• “CALLBACK” s dsplayed on the callng staton dsplay.
• Whle n call back mode, two dot ndcatons blnk at the left
edge and 2nd of the LCD.
When the call back function is turned OFF:
The callng staton code s stored nto the call back memory
only when no reply call s performed, or the clear down oper-
aton s performed at the callng staton before reply the call.
• Up to 15 calls can be stored nto the call back memory.
• “
” blnks to let operator knows the un-repled calls are
avalable.
• When [Call Back] s pushed to conirm the stored contents,
the call back ndcator blnkng stops and dsplayed contnu-
ously.
• The call back memory s cleared after turnng the trans-
cever OFF.
• The regular calling operation can be performed even the
call back function is turned ON.
q
Durng “
” appears or blnks, push [Call Back] to dsplay
the stored staton code or text name.
w
Push [Up]/[Down] to select the desred memory.
e
Push [PTT], [Call Set Up] or [#] to reply to the call that
from the selected staton code.
• The staton code wll be erased from the call back mem-
ory when the reply call s performed.
• The call back operaton cannot be performed to PSTN,
PABX, Inter-preix and Inter-leet calls.
