manualshive.com logo in svg

Icom IC-9700, Основное руководство, Страница: 84 / 96

Поделиться
Скачать
Icom IC-9700 Скачать руководство пользователя страница 84

10

MAINTENANCE

10-9

Troubleshooting (Continued)

PROBLEM

POSSIBLE CAUSE

SOLUTION

REF�

A Local area call can be 

made, but the Gateway 

call or destination station 

call cannot be made.

MY call sign has not been registered on 

a D-STAR repeater.

Register your own call sign (MY) on 

a gateway repeater, or confirm the 

registration of the call sign.

The repeater set in “FROM” (Access 

Repeater) has no Gateway.

Check the repeater settings.

“L” is displayed on the 

LCD.

While receiving through the internet, 

some packets may be lost due to 

network error (poor data throughput 

performance).

Wait a while, and try it again.

L

 When the transceiver receives 

corrupted data, and misidentifies it is 

as Packet Loss, “L” is displayed, even 

if it is a Local area call.

“DV” and “FM” icons 

alternately blink.

While in the DV mode, an FM signal is 

received.

Use a different operating frequency until 

there are no FM signals on the original 

frequency.

Содержание IC-9700

































































































Отзывы:

Нет отзывов