3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
3-10
RF gain and SQL level
Noise squelch (FM/DV mode)
Maximum RF gain
S-meter squelch
adjustable range
Maximum S-meter
squelch
Squelch is open
RF gain
adjustable range
Minimum RF gain
is displayed
Dial Lock function
Transmit Power Limit function
The Dial Lock function prevents frequency changes
caused by accidently moving
MAIN DIAL
.
L
This function electronically locks the dial.
The Transmit Power Limit function limits the output
power to the preset level for each band.
1. On the FUNCTION set screen, touch [TX PWR LIMIT].
•Each touch turns the function ON or OFF.
2. Touch [TX PWR LIMIT] for 1 second.
3.
Rotate
MULTI
to set the maximum transmit power.
Hold down
Adjusting the transmit output
power
Before transmitting, monitor your selected operating
frequency to make sure you do not cause interference to other
stations on the same frequency. It is good amateur practice
to listen first, and then, even if nothing is heard, ask if the
frequency in use once or twice, before you start operating.
D
Adjusting the transmit output power
1.
Select the operating mode. (p. 3-3) (Example: USB)
2.
Touch the meter to display the Po meter. (p. 3-11)
Lights red
Push
3.
Open the Multi-function menu.
5.
Touch “RF POWER.”
6. Adjust the transmit output power to between 0 and
100%.
• The Po meter displays the RF output power in a
percentage. It becomes the S-meter while receiving.
7. Push
TRANSMIT
or release [PTT].
•Returns to receive.
Hold down
SPEECH
for 1 second to turn the
Dial Lock function ON or OFF.
• During Split Frequency operation, the Split
Lock function may be turned ON. (p. 4-10)
MENU
» SET > Function >
Lock Function
Hold down
Rotate
AF
RF/SQL
(outer) to adjust the RF gain and
SQL level.
By default, rotating left (when set to the 12 o’clock
position) adjusts the RF gain, and rotating right
adjusts the squelch level, as described below.
RF gain
Adjust the RF gain to decrease the noise received
from a nearby strong station.
• Rotate counterclockwise to reduce the RF gain, which
reduces the receive sensitivity. “RFG” appears when
AF
RF/SQL
is set to the counterclockwise from the 11 o’clock
position. “RFG” indicates that the RF gain is reduced.
L
If a strong signal is received and “OVF” (Overflow)
appears, reduce the RF gain until “OVF” disappears.
SQL level
There are 2 types of SQL levels, depending on the
operating mode.
•
Noise squelch
Rotate the
AF
RF/SQL
(outer) until the noise just
disappears and the TX/RX indicator goes OFF.
•
S-meter squelch
The S-meter squelch disables the audio output from
the speaker or headphones when the received signal is
weaker than the specified S-meter squelch level.
Rotate the
AF
RF/SQL
clockwise from the 12 o’clock
position to increase the S-meter threshold level.
L
You can change the
AF
RF/SQL
(outer) control type in
“RF/SQL Control.” (p. 3-10)
MENU
» SET > Function >
RF/SQL Control
Lights red
4.
Push
TRANSMIT
or hold down [PTT].
• The Po meter level changes according
to your voice level in the SSB mode.
• The TX/RX indicator lights red and
is displayed.
4.
Push
MULTI
to close the MENU.
Set transmit power
Limited transmit power (LIMIT value)
Even when set RF POWER exceeds
“LIMIT,” the actual output power is
limited to this value.
