3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
3-4
Setting the frequency
D
About the Tuning Step function
You can set the
MAIN DIAL
’s tuning step for each
operating mode.
Touch the kHz digits to turn the Tuning Step function
ON or OFF.
L
The Tuning Step function's icon “▼” is displayed above
the 1 kHz digit.
D
About the 1 Hz step Fine Tuning
function
You can use the minimum tuning step of 1 Hz for fine
tuning in the SSB, CW and RTTY modes.
Touch the Hz digits for 1 second to turn the Fine
Tuning function ON or OFF.
D
About the 1 MHz Step Tuning function
You can use the maximum tuning step of 1 MHz.
Touch the MHz digits for 1 second to turn the MHz
Step Tuning function ON or OFF.
L
When using the [UP]/[DN] keys on the microphone,
the frequency changes in 1 MHz steps.
D
Changing the Tuning Step
When the Tuning Step function is ON, you can change
the tuning steps for each operating mode.
1.
Select the desired operating mode. (p. 3-3)
(Example: FM)
2. Touch the kHz digit for 1 second.
The Tuning Step
function is ON.
D
Using the Main Dial
1.
Select the desired operating band. (p. 3-3)
(Example: 145 MHz)
2. Rotate
MAIN DIAL
.
• The frequency changes according to the selected
Tuning Step.
L
is displayed when you set an amateur radio
frequency, and
(with dotted line) is displayed
when you set a frequency outside the Ham band, or
outside your set Band Edges.
•The TS (FM) screen is displayed.
3.
Touch the desired tuning step. (Example: 0.1 k)
L
When using the [UP]/[DN] keys on the microphone,
the frequency changes in 50 Hz steps with the Fine
Tuning function ON or OFF.
The 1 Hz digit
is displayed.
The MHz Step
function is ON.
• The tuning step is set and returns to the previous
screen.