background image

3

BASIC OPERATION

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

3-6

Setting the frequency (Continued)

Entering the Split Frequency Offset

1. 

Touch the MHz digits. (Example: 146)

Selecting a Memory channel by number

1.  Touch 

V/M

 to select the Memory mode.

2. 

Touch the MHz digits. (Example: 146)

 •Opens the BAND STACKING REGISTER screen.

2.  Touch [F-INP].

 •Opens the F-INP screen.

3. 

Enter the Split Frequency Offset.

L

If you want the minus shift direction, touch [

(

)].

L

 Enter the offset between 

9.999 MHz and +9.999 

MHz (1 kHz steps).

L

To clear the entry, touch [CE].

L

 To clear the entry and return to the previous screen, 

push 

EXIT

.

L

 After entering, the Split function is automatically 

turned ON.

4. 

To save the entry, touch [SPLIT] or [

SPLIT].

 •Closes the F-INP screen.

Entry examples

 •5 kHz:   

[5], [SPLIT]

 

10 kHz: 

[

(

)], [1], [0], [

SPLIT]

 •Opens the BAND STACKING REGISTER screen.

3. 

Touch [F-INP].

 •Opens the F-INP screen.

4. 

 Enter a Memory channel number. (Example: 10)

L

 If you want to set the Program Scan Edge channel or 

Call channel, enter between “100” ~ “107.”

 

D

Band Edge Beep

You will hear a Band Edge Beep and 

 will be 

displayed when you tune into or out of an amateur 

band’s frequency range.

L

 You can change the Band Edge Beep settings in the 

following menu.

MENU

 »  SET > Function > 

Band Edge Beep

L

 If the Beep Level item is set to “0%,” no beep sounds.

MENU

 »  SET > Function > 

Beep Level

[SPLIT] or 

[-SPLIT] is 

displayed

NOTE:

If the entered operating frequency is out of an 

amateur band’s frequency range, the transmit 

frequency is automatically set to the band edge 

frequency.

Channel type Channel number Number to enter

Programming 

Scan Edge

1A

100

1B

101

2A

102

2B

103

3A

104

3B

105

Call channel

C1

106

C2

107

5.   Touch [MEMO] to select the memory channel of 

entered number .

 • Closes the F-INP screen.

 •The selected memory channel contents are displayed.

Содержание IC-9700

































































































Отзывы: