8-14
BASIC MANUAL
8
SET MODE
Connectors
» SET >
Connectors
Speaker MIC AF Output
(Default: ON)
Selects the AF Output device when the speaker
microphone is connected.
•
OFF (Internal Speaker):
Sets the internal speaker as the AF Output
device.
•
ON: Sets the speaker microphone as the AF
Output device.
SP Jack Function
(Default: Speaker)
Selects the audio output from the [EXT-SP] jack.
• Speaker:
The audio is output from only the Left
channel through the amplifier for a
speaker.
• Phone:
The audio is output from only the Left
channel through the amplifier for a
headphone.
•
Phone (L+R): The audio is output from the Right
and Left channels through the
amplifier for a headphone.
Phones Level
(Default: 0)
Sets the audio output level ratio of the headphone and
internal speaker between -15 and +15.
» SET > Connectors >
USB/AV-OUT AF/IF Output
L
The signal is output from the [AV-OUT] jack only
when in the ATV mode.
Output Select
(Default: AF)
Selects the signal output from the [USB] port and the
[AV-OUT] jack.
•
AF: An AF signal is output.
•
IF: A 12 kHz IF signal is output.
AF Output Level
(Default: 50%)
Sets the AF output level of the [USB] port and the [AV-
OUT] jack, when “Output Select” of USB is set to “AF.”
AF SQL
(Default: OFF (Open))
Selects whether or not to output the audio from the [USB]
port and the [AV-OUT] jack, depending on the squelch
state, when “Output Select” of USB is set to “AF.”
•
OFF (Open): The squelch is always open,
regardless of the transceiver’s
squelch level.
• ON:
The squelch opens and closes,
according to the transceiver’s squelch
level.
AF Beep/Speech... Output
(Default: OFF)
Sets the Beep and Speech audio output setting of
the [USB] port and the [AV-OUT] jack, when “Output
Select” of USB is set to “AF.”
•
OFF: The beep and speech audio are not output.
• ON: The beep and speech audio are output.
IF Output Level
(Default: 50%)
Sets the IF output level of the [USB] port and the [AV-
OUT] jack, when “Output Select” of USB is set to “IF.”
» SET > Connectors >
LAN AF/IF Output
Output Select
(Default: AF)
Selects the signal output from the [LAN] connector.
•
AF: An AF signal is output.
•
IF: A 12 kHz IF signal is output.
AF SQL
(Default: ON)
Selects whether or not to output the audio from the
[LAN] connector, depending on the squelch state,
when “Output Select” of LAN is set to “AF.”
•
OFF (Open): The squelch is always open,
regardless of the transceiver’s
squelch level.
• ON:
The squelch opens and closes,
depending on the transceiver’s
squelch level.
» SET > Connectors >
MOD Input
USB MOD Level
(Default: 50%)
LAN MOD Level
(Default: 50%)
Sets the modulation input level of each interface.
DATA OFF MOD
(Default: MIC,USB)
DATA MOD
(Default: USB)
In the SSB, AM, or FM mode, selects the connector(s)
to input the modulation signal when the Data mode is
OFF, or ON.
AV-IN MOD Level
(Default: 50%)
Sets the modulation input level of the Audio terminal
on the [AV-IN] jack.
ATV MOD
(Default: MIC, AV-IN)
Selects the connector(s) to input the modulation signal
when in the ATV mode.
Содержание IC-905
Страница 1: ...BASIC MANUAL ALL MODE TRANSCEIVER 905...
