Icom IC-905 Скачать руководство пользователя

Страница: 4 / 96

iii

BASIC MANUAL

ABOUT SPURIOUS SIGNALS

Spurious signals may be received near the following

frequencies. These are made in the internal circuit and

does not indicate a transceiver malfunction:

• 144.3823 MHz

• 430.0783 MHz

• 438.5853 MHz

• 1261.7196 MHz

• 1273.0623 MHz

• 1276.8433 MHz

• 1277.9504 MHz

• 1287.0387 MHz

• 1287.0466 MHz

• 1287.7261 MHz

• 1291.9673 MHz

• 1295.5182 MHz

• 1297.6387 MHz

• 2402.5185 MHz

• 5666.2705 MHz

• 5687.9985 MHz

• 5701.6305 MHz

This product includes RTOS “RTX” software, and is

licensed according to the software license.

This product includes “zlib” open source software, and is

licensed according to the open source software license.

This product includes “libpng” open source software, and

is licensed according to the open source software license.

This product includes “mbed TLS” open source software,

and is licensed according to the open source software

license.

Refer to the “About the Licenses” page at the end of the

manual in English for information on the open source

software being used in this product.

This software is based in part on the work of the

Independent JPEG Group, and is licensed according to the

open source software license.

VOICE CODING TECHNOLOGY

The AMBE+2™ voice coding Technology embodied

in this product is protected by intellectual property

rights including patent rights, copyrights and trade

secrets of Digital Voice Systems, Inc. This voice

coding Technology is licensed solely for use within this

Communications Equipment.

The user of this Technology is explicitly prohibited

from attempting to extract, remove, decompile,

reverse engineer, or disassemble the Object Code,

or in any other way convert the Object Code into a

human-readable form. U.S. Patent Nos.

#8,595,002, #8,359,197, #8,315,860,

#8,200,497, #7,970,606, #6,912,495 B2.

TRADEMARKS

Icom and the Icom logo are registered trademarks

of Icom Incorporated (Japan) in Japan, the United

States, the United Kingdom, Germany, France,

Spain, Russia, Australia, New Zealand, and/or other

countries.

Adobe, Acrobat, and Reader are either registered

trademarks or trademarks of Adobe Systems

Incorporated in the United States and/or other

countries.

AMBE+2 is a trademark and property of Digital Voice

Systems Inc.

All other products or brands are registered trademarks

or trademarks of their respective holders.

Содержание IC-905

































































































Результаты поиска

Содержание IC-905

Отзывы:

Похожие инструкции для IC-905

Бренды по названию

Популярные бренды

Icom IC-905, Основное руководство

Результаты поиска

Содержание IC-905

Отзывы:

Похожие инструкции для IC-905

Бренды по названию

Популярные бренды