background image

3-9

BASIC MANUAL

3

BASIC OPERATION

RF gain and SQL level

1.  Push 

.

2.  Touch an item to adjust. (Example: RF GAIN)

 

3.  Rotate 

.

RF gain

You can adjust the receive sensitivity.
If a strong interfering signal is received, rotate 

 counterclockwise to reduce the RF gain.

 

L

“RFG” is displayed when the RF gain is reduced.

 

L

If a strong signal is received and “OVF” (Overflow) is 

displayed, reduce the RF gain until “OVF” disappears.

Squelch (SQL) level

There are 2 types of SQL levels, depending on the 

operating mode.

 •

Noise squelch

Rotate 

 until the noise just disappears and 

the RX indicator goes OFF.

 

L

Activates when the squelch level is set to between 30% 

and 50% in the FM or DV mode.

 •

S-meter squelch

The S-meter squelch disables the audio output from 

the speaker or headphones when the received signal 

is weaker than the specified S-meter squelch level.

Rotate 

 clockwise to increase the S-meter 

threshold level.

 

L

Activates when the squelch level is set to between 50% 

and 100% in any mode.

S-meter squelch level

Adjusting the microphone gain

1.  Set the operating band and mode to SSB, AM, 

FM, DV, or ATV. (p. 3-2)

2.  Push 

 to open the Multi-function menu.

3.  Hold down [PTT].

4.  Touch [MIC GAIN], and rotate 

 to adjust 

the microphone gain.

 

 

L

Information

 •

Hold the microphone 5 to 10 cm (2 to 4 inches) from 

your mouth, then hold down [PTT] on the microphone 

and speak at your normal voice level.

 •

In the SSB mode, touch the TX meter to select the 

ALC meter, and rotate to adjust the microphone gain 

until the meter reading swings between 30 to 50% of 

the ALC scale.

 •

In the AM, FM, DV, or ATV mode, check the audio 

clarity with another station, or use the Monitor 

function (p. 4-2).

5.  Release [PTT].

 •

Returns to receive.

Содержание IC-905

































































































Отзывы: