8-9
BASIC MANUAL
SET MODE
8
8
» SET > DV/DD Set >
DV Fast Data
Fast Data
(Default: OFF)
Selects whether or not to use the DV Fast Data
function for data communication in the DV mode.
The DV Fast Data function uses the data and the
audio frames to send data approximately 3.5 times
faster than the normal speed. So, no audio can be
sent.
•
OFF: Sends data at a slow speed (approximately
950 bps).
• ON: Sends data at a fast speed (approximately
3480 bps).
L
Even if “ON” is selected, when you push the microphone’s
[PTT], the data is sent at the slow speed, because the
audio frame is used for the audio transmission.
The GPS data speed is set in “GPS Data Speed.”
GPS Data Speed
(Default: Slow)
Sets the GPS data speed when the data is sent using
the DV Fast Data function.
• Slow: Sends GPS data in the slow speed
(approximately 950 bps).
•
Fast: Sends GPS data in the fast speed
(approximately 3480 bps).
TX Delay (PTT)
(Default: 2sec)
Sets the time for when the transceiver returns to
receive after sending DV data in the DV Fast Data
mode using the microphone’s [PTT].
•
OFF:
After releasing [PTT], the transceiver
returns to receive.
• 1 ~ 10sec: After releasing [PTT], the transceiver
sends data using the DV Fast Data
mode for this set period.
When the TX data is completely sent
within this set period, the transceiver
automatically returns to receive.
NOTE:
This function is usable only when “DV Data
TX” is set to “PTT.”
DV/DD Set
» SET >
DV/DD Set
Standby Beep
(Default: ON (to me:Alarm/High Tone)
Turns the Standby Beep function ON or OFF.
This function sounds a beep after a received signal
disappears, in the DV mode.
•
OFF: Does not sound a beep after a received signal
disappears.
• ON: Sounds a beep after a received signal
disappears.
• ON (to me:High Tone):
Sounds a high pitched beep when a received
signal that is addressed to your call sign (MY)
disappears. When any other received signal
disappears, a regular beep sounds.
• ON (to me:Alarm/High Tone):
Sounds alarm (PiRoPiRoPiRo) when a
received signal that is addressed to your
call sign (MY) disappears. When any other
received signal disappears, a regular beep
sounds.
L
The standby beep sounds even when “Beep
(Confirmation)” is set to “OFF.”
L
The standby beep output level depends on the “Beep
level” setting.
Auto Reply
(Default: OFF)
Sets the Automatic Reply function to ON, OFF, or
Voice. This function automatically replies to a call
addressed to your own call sign (MY), even if you are
away from the transceiver.
•
OFF: Turns OFF the function.
• ON: Replies with your own call sign (MY). (No
audio reply is sent)
• Voice: Replies with your call sign (MY) and any
Auto Reply message recorded on the SD
card (up to 10 seconds). If no SD card is
inserted, or no message is recorded, only
your call sign is transmitted. The transmitted
audio can be monitored.
L
When “ON” or “Voice” is selected, the Automatic Reply
function is automatically turned OFF when you push the
microphone’s [PTT].
DV Data TX
(Default: Auto)
Selects whether to manually or automatically transmit
data in the DV mode.
• PTT: Push the microphone’s [PTT] to manually
transmit data.
• Auto: When data is input from a PC through the
[USB] port, the transceiver automatically
transmits it.
Содержание IC-905
Страница 1: ...BASIC MANUAL ALL MODE TRANSCEIVER 905...
