3 - 4
3-1-7 DSP RECEIVER CIRCUIT
(DSP-A AND DSP-B BOARDS)
The DSP (Digital Signal Processor) circuit enables digital IF
filter, digital noise reduction, digital PSN (Phase Shift
Network)/Low Power/Phase demodulation, digital automatic
notch, etc.
• RX-A AND RX-ONLY CIRCUITS (DSP-A BOARD)
The 36 kHz 2nd IF signal from the 2nd IF amplifier (RXPLL-
A unit, IC1506) passes through the analog switch (IC331,
pins 1, 7) with limiter function, and is then applied to the
buffer amplifiers (IC301, pin 2, IC341, pin 2, IC371, pin 2) to
convert to balancing signal. The signal is applied to the A/D
convertor (IC401, pins 4, 5).
The converted digital signals are applied to the DSP IC (IC1)
to do filtering, demodulate and so on. The demodulated dig-
ital signals are applied to the D/A convertor (IC551) to con-
vert into analog AF signals.
The converted analog AF signals pass through the low-pass
filter (IC601, pins 3, 6, IC651, pins 3, 6), and are then
applied to the buffer amplifier (IC701, pins 2, 3) to convert
into unbalancing signals.
The signals are applied to the AF amplifier circuit.
• RX-B CIRCUIT (DSP-B BOARD)
The 36 kHz 2nd IF signal from the 2nd IF amplifier (RXPLL-
B unit, IC1506) passes through the analog switch (IC331,
pins 1, 7) with limiter function, and is then applied to the
buffer amplifiers (IC301, pin 2, IC341, pin 2, IC371, pin 2) to
convert to balancing signal. The signal is applied to the A/D
convertor (IC401, pins 4, 5).
The converted digital signals are applied to the DSP IC (IC1)
to do filtering, demodulate and so on. The demodulated dig-
ital signals are applied to the D/A convertor (IC551) to con-
vert into analog AF signals.
The converted analog AF signals pass through the low-pass
filter (IC601, pins 3, 6, IC651, pins 3, 6), and are then
applied to the buffer amplifier (IC701, pins 2, 3) to convert
into unbalancing signals.
The signals are applied to the AF amplifier circuit.
3-1-8 AF AMPLIFIER CIRCUITS (MAIN UNIT)
The AF amplifier circuits amplifies the AF input signals to the
suitable driving level for the speaker.
• MAIN SPEAKER OUTPUT
The AF signals from the DSP-A and DSP-B boards are
applied to the AF switch (MAIN unit: IC100, pin 7 for DSP-A,
pin 6 for DSP-B), and pass through the SQL switch (Q100)
which is controlled by “SQLM” signal. The signals are
applied to the buffer amplifier (IC102, pin 3), and are then
amplified at the VCA (Voltage Control Amplifier) circuit
(IC105, pin 14). The amplified signals from the VCA circuit
(pin 11) are applied to the AF power amplifier (IC140, pin 1)
to obtain the suitable driving level for speaker. The output
signals from pin 13 pass through the mute switch (Q141,
RL140), and are then applied to the internal speaker jack
(J142, pin 1) via the MAIN speaker phone jack (J140).
• SUB SPEAKER OUTPUT
The AF signals from the DSP-A and DSP-B boards are
applied to the AF switch (MAIN unit: IC101, pin 6 for DSP-A,
pin 7 for DSP-B), and pass through the SQL switch (Q101)
which is controlled by “SQLS” signal. The signals are
applied to the buffer amplifier (IC102, pin 5), and are then
amplified at the VCA (Voltage Control Amplifier) circuit
(IC105, pin 1). The amplified signals from VCA circuit from
pin 4 are applied to the AF power amplifier (IC140, pin 2) to
obtain the suitable driving level for speaker. The output sig-
nals from pin 12 pass through the mute switch (Q141,
RL140), and are then applied to the SUB speaker jack
(J141).
[Main SP out]
[Sub SP out]
Int. SP
"PHI" signal to the Front CPU.
DRAF
7
6
1
IC100
Mute
DSP-A board
CHASSIS unit
FRONT unit
DSP-B board
CROSS signal
5
7
Q100
Q101
6
1
IC101
CROSS signal
IC102
IC105
IC140
IC180
IC182
5
Amp.
Amp.
SQL
SW
VCA
VCA
SQL
SW
VCA
VCA
PA
PA
AF
AF
• AF AMPLIFIER CIRCUIT
Содержание IC-7800
