![background image](http://html2.mh-extra.com/html/icom/ic-7100/ic-7100_instruction-manual_3605333114.webp)
12
SCAN OPERATION
12-12
Previous view
Select Memory scan
D
The Select Memory scan searches for signals through
Memory channels specifi ed as “
” (Select).
NOTE:
For a Select Memory scan to start, two or
more Memory channels must be designated as Se-
lect Memory channels. (See below)
Follow steps
q
q
through
e
as described on the page
??-?? to display the “SCAN” screen.
Touch [MEMO](
w
D
) for 1 second, and then touch
“SEL-MEMO” to start the Select Memory scan.
•
The MHz and kHz decimal points, and “SEL–MEMO
SCAN” blink while scanning.
•
If “Up/Down” is selected as the “MAIN DIAL (SCAN)” op-
tion in the Scan Set mode, rotating the Dial changes the
scanning direction. (p. ??-??)
Push [MEMO](
e
D
) to cancel the scan.
While Select Memory scanning
Touch [MEMO]
for 1 second.
Touch
“SEL-MEMO.”
Appears
Memory scan (Memory mode) (Continued)
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch panel)
L
eft
R
ight
C
enter
D
isplay