13
USING AN SD CARD
13-4
Previous view
Turn OFF the transceiver.
q
Insert the card into the slot until it locks in place, and
w
makes a ‘click’ sound.
•
“
” appears when the SD card is inserted.
•
“
” and “
” alternately blink while accessing the SD
card.
NOTE:
Before inserting, be sure to check the card
direction.
If the card is forcibly or inversely inserted, it will dam-
age the card and/or the slot.
Inserting the SD card
Terminals
facing down
Cut corner side
Front
panel
SD card
Appears
●
w
q
q
Formatting the SD card
D
• If you use a brand new SD card, format it, by doing
the following steps.
•
Formatting a card erases all its data.
Before for-
matting any programmed card, make a backup fi le
onto your PC.
Turn OFF the transceiver, and then insert the card
q
into the slot.
Turn ON the transceiver.
w
•
“
” appears when the SD card is inserted.
Push
e
SET
(
C
) to enter the Set mode.
Touch the “SD Card” Set mode.
r
•
If the specifi ed item is not displayed, touch [
∫
] or [
√
](
D
)
one or more times to select the page.
Touch the “Format” item.
t
• The confi rmation screen “Format OK?” appears.
Touch [YES](
y
D
).
•
The formatting starts and the display shows the format-
ting progress.
•
After formatting ends, the display automatically returns to
the screen displayed before touching [YES](
D
).
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch panel)
L
eft
R
ight
C
enter
D
isplay