1
PANEL DESCRIPTION
1-8
Previous view
Front panel (Controller) (Continued)
q
TX ICON
Indicates either the displayed frequency can be
transmitted, or not.
➥
“
” appears while the operating frequency is in
an amateur band.
➥
“
” appears while the operating frequency is
not in an amateur band. However, when the “Band
Edge Beep” item is set to “OFF” in the “Function”
Set mode (p. 85), “
” does not appear.
SET
> Function >
Band Edge Beep
“LMT” appears while the output power is de-
➥
creased due to the Power FET’s temperature is
high.
“HOT” appears while the transmission is inhibited
➥
due to the Power FET’s temperature is too high.
w
MODE ICONS
(p. 43)
Displays the selected operating mode.
➥
•
“-D” appears when SSB data, AM data or FM data
mode is selected.
Touch to enter the Mode selection screen.
➥
•
On the Mode selection screen, touch the block to se-
lect the operating mode.
e
PASSBAND WIDTH ICON (p. 75, 77)
Graphically displays the passband width for twin
PBT operation and center frequency for IF shift op-
eration.
r
IF FILTER ICON (p. 75, 77)
Shows the selected IF fi lter.
➥
Touch to select one of three IF fi lter settings.
➥
•
The selected fi lter passband width and shifting value
are displayed for 2 seconds on the window.
➥
Touch for 1 second to display the “FILTER” screen
(Filter) to adjust the fi lter passband width.
➥
When the “FILTER” screen is displayed, touch for
1 second to return to the previous screen.
t
QUICK TUNING ICON
Appears when the Quick tuning mode is selected.
•
When “
Z
” is displayed, the frequency changes in pre-set
kHz or 1 MHz quick tuning steps. (p. 38)
•
When “
Z
” is not displayed, the frequency changes in 10
Hz or 1 Hz steps. (pp. 37, 39)
y
FREQUENCY READOUTS
Displays the operating frequency.
➥
Touch the MHz digits to enter the Band selection
➥
screen.
Touch the MHz digits for 1 second to turn the 1
➥
MHz quick tuning mode ON or OFF.
Touch the kHz digits to turn the pre-set kHz quick
➥
tuning mode ON or OFF.
Touch the kHz digits for 1 second to enter the Tun-
➥
ing step selection screen.
Touch the Hz digits to for 1 second to toggle be-
➥
tween 10 Hz and 1 Hz steps.
u
SD CARD ICON
➥
“ ” appears when an SD card is inserted.
➥
“ ” and “ ” alternately blinks while accessing the
SD card.
i
CLOCK READOUT
Shows the current time.
• UTC time or local time can be selected.
o
SPLIT ICON
(p. 82)
Appears when the Split function is turned ON.
o
LOCK INDICATOR (p. 37)
Appears when the Lock function is activated.
!0
LOCK ICON
(p. 77)
Appears when the Lock function is turned ON.
q
y
w
e
r
t
u i
o
!0
@1
@2
@3
@4
@5
!1
!2
!3
!5
!4
!6
!7
!8
!9
@0
Display
D