Icom IC-705, Справочное руководство

Страница: 23 / 29

22
REMOTE CONTROL
Remote control (CI-V) information
D
Command formats
• DV Digital code squelch setting
Command: 1B 07
First digit: 0
~ 9
Second digit: 0
~ 9
1
X X
• DV MY call sign setting
Command: 1F 00
Set your own call sign and note of up to 12
characters�
See “Character’s code of the call sign�”
X X X X X X X X X X X X
9
~
12 1
~
8
∙∙∙∙∙∙∙∙
1
~
8
: Your own call sign setting (8 characters)
9
~
12
: Note setting (4 characters)
• DV TX call signs setting (24 characters)
Command: 1F 01
Set “UR,” “R1,” and “R2” call signs of 8
characters (fixed)�
See “Character’s code of the call sign�”
X X ∙∙∙∙∙∙∙∙ X X X X X X X X X X ∙∙∙∙∙∙∙∙
17
~
24 9
~
16 1
~
8
∙∙∙∙∙∙∙∙
1
~
8
: UR (Destination) call sign setting
(8 characters)
9
~
16
: R1 (Access/Area repeater) call sign setting
(8 characters)
17
~
24
: R2 (Link/Gateway repeater) call sign setting
(8 characters)
Character’s code of the call sign
Character ASCII code
0 ~ 9 30 ~ 39
A ~ Z 41 ~ 5A
(Space) 20
/ 2F
• DV TX message setting
Command: 1F 02
Set the transmit message of up to 20 characters�
See “Codes for character entries�” (p� 18)
“FF” stops sending or reading messages�
• DV RX call sign data
Command: 20 0001, 0002
X X X X X X X X X X X X ∙∙∙∙∙∙ X X X X ∙∙∙∙∙∙
X X ∙∙∙∙∙∙ X X X X ∙∙∙∙∙∙ X X
1
,
2 3
~
10 11
~
14 15
~
22
23
~
30 31
~
38
1
: Header flag data (First byte)
Data Description
bit7 (0: Fixed) —
bit6
(0: Fixed) —
bit5 (0: Fixed) —
bit4 0/1 0=Voice, 1=Data
bit3 0/1 0=Direct, 1=Through repeater
bit2 0/1 0=No Break-in, 1=Break-in
bit1 0/1 0=Data, 1=Control
bit0 0/1 0=Normal, 1=EMR
2
: Header flag data (Second byte)
Data
Description
bit2 bit1 bit0
1 1 1 Repeater control
1 1 0 Send auto acknowledge
1 0 1 (Not used)
1 0 0 Request to re-transmit
0 1 1 Send acknowledge
0 1 0 Receive no reply
0 0 1 Repeater disabled
0 0 0 NULL
3
~
10
: Call sign of the caller station
(8 characters, fixed)
11
~
14
: Note of the caller station
(4 characters, fixed)
15
~
22
: Call sign of the called station
(8 characters, fixed)
23
~
30
: Call sign of the access/area repeater (R1)
(8 characters, fixed)
31
~
38
: Call sign of the link/gateway repeater (R2)
(8 characters, fixed)
See “Codes for character entries�” (p� 18)
L
FF: When no call sign is received since the
transceiver power was turned ON�